Display-devices SE-B Series Projector Sound Enclosure Manuel d'utilisateur télécharger pdf (Page 3)

Sound Enclosure Lower Cavity Reversal

6/7/2005

6. Carefully lift the lower guide assembly off the threaded studs. Do not twist the

guides.

7. Rotate the lower cavity 180° and reposition the guide assemblies on the threaded

studs. Be careful not to flex the guide assemblies.

8. Replace and tighten the 11/32” washers and nuts of both guide assemblies.

9. Grasp the vice grips holding the spring and pull the spring, extending it until you

can hook the spring end over the threaded stud. Replace and tighten the 7/16”

washers and nuts of both assemblies.

Alternative to cavity reversal for opposite air flow (tools required: 7/16” wrench,

Phillips-head screwdriver, 11/32” open-end wrench). Remove fan assemblies, remove

fans and reinstall in reverse. On the side of the fan you will notice a directional arrow

for air flow.

Removal Nuts

Fan Bolts

1 2 3

Pas de commentaire

Display-devices SE-B Series Projector Sound Enclosure Manuel d'utilisateur Page 3